Engineer Mechanical Instrumentation Electrical (manufacturing Talent Program)
- Categorie: Elektromechanica
Bedrijf: SABIC
Beschrijving: Department: Improvements – Shared Resources Site Geleen The Site Geleen encompasses 7 plants, including 2 Naphtha crackers, a Logistics unit, a Polypropylene and 2 Polyethylene units. The Naphtha crackers produce 1,250,000 tonnes of ethylene and 675,000 tonnes of propylene which are mainly used as feedstock for the successive poly-olefins plants. Our polyethylene product range includes all of the commodity thermoplastic polymers, linear low density polyethylene (LLDPE), low density polyethylene (LDPE), and high density polyethylene (HDPE). The polypropylene product range includes block copolymer and specialty automotive grades. Structure Site Geleen On the site we have a clear split between Running Business (short term) and Site Improvements (long term) Site Services supports all these departments. The Running Business is responsible for a safe and maximum production. Site Improvements is responsible for the right project proposals to improve the production process, including process integrity and safety, and for the implementation of the project proposals. The purpose of Site Services is to service all departments in an efficient; transparent and customer friendly way. The Site Management Team consists of the Site Director; Directors of Running Business; Site Improvements and Site Services. To enhance our workforce we are looking for enthusiastic and dedicated Engineers from several disciplines (Mechanical, Instrumentation, Electrical, Advanced Process Control) for the departments Site Improvements and Running Business. Manufacturing Talent Program (MTP). Engineers with no or with limited work experience mainly start in our Manufacturing Talent Program. The goal of this program is to get acquainted with SABIC Europe, its culture and organization and to get ready for the “real” job. The Manufacturing Talent Program has a leadtime of 1.5 year and consists of two technical trainee periods, containing the following items: Training on the job and additional training and courses Doing two projects, one within olefins and one within poly-olefins Getting to know the SABIC Manufacturing organization & people (Running Business, Site Improvements and Site Services) Getting to know the several plants (different sizes, technologies, problems etc.) Getting to know the culture Getting challenged on your personal competences Running an experience event The Challenge Our Engineers Mechanical, Instrumentation, Electrical, Advanced Process Control are involved in maintenance and ongoing improvements of plant reliability and integrity. They organize and manage these projects independently and contract out the implementation to the Maintenance department or to contractors with whom we have a long-term relationships. Their main responsibilities are: to solve and troubleshooting technical problems to improve the production process regarding Capacity & Capability, Reliability & Availability and Integrity & Compliancy to formulate the technical policy regarding equipment Integrity and reliability in which installations can be operated to determine predictive & preventive maintenance plans for running business assets to set up and monitor the budget regarding predictive, preventive & break-down maintenance to set up and implement improvement projects within budget, on-time and in accordance to corporate and legal requirements to conduct investigations, route cause analyses and studies to support and advise the management in maintaining safety and integrity to stimulate and work together in multidisciplinary teams Your Profile You are finishing or have just finished your bachelor or master of science in mechanical engineering, applied physics, electrical engineering or advanced process control engineering You are a good communicator and you have well developed social skills You have excellent analytical skills, you can switch between conceptual and detailed level You show ownership and you are eager to reach the agreed results You are fluent in English and preferably also in Dutch, or you are willing to learn Dutch Further Information Please apply online before the 31st of Oktober 2011. For further information, please contact: Mr. Roel van de Ven, Recruiter, tel. + 31 (0) 6 1500 77 75. For this position SABIC Europe is offering excellent primary and secondary working conditions. You have the opportunity to share your future in a growing international company in an ambitious, professional and dynamic environment. Sharing our futures in leadership SABIC is one of the world’s leading manufacturers of chemicals, fertilizers, plastics and metals. We supply these materials to other companies, who use them to make products on which the world has come to depend. We are the largest and most reliably profitable public company in the Middle East. Our success is the result of our focus on three key areas: investment in local partnerships, outstanding research and technology programs, and an ambitious global growth strategy. And last, but certainly not least, because of our talented employees who have a passion to deliver. In Europe, SABIC employs over 6,000 professionals and is running 6 world-scale production sites and 4 technology & innovation centers. We are present in almost every European country. Major locations within our broad network of innovation, production and marketing are: Teesside (UK), Cartagena (Spain), Gelsenkirchen (Germany), Geleen (Netherlands) Bergen op Zoom (The Netherlands) and Genk (Belgium). Based upon this strong fundament, we are a key producer of olefins, polyolefins, engineering thermoplastics resins, films and sheets in Europe. At SABIC we are pushing the limits further. We are ambitious and striving to become the preferred world leader in chemicals. To achieve this ambition, we strongly invest in our most important asset – our employees. We see it as our task to help you develop a career with us that challenges you in ways that really make you come alive. Make your career happen with SABIC.
Locatie: Sittard-Geleen
Uren: Vast contract, bepaalde tijd
Datum: 05-10-2011
Lees verder
| Manufacturing Talent Program Engineer Mechanic Manufacturing Talent Program, Engineer Mechanical, instrumentation, Electrical Reference Number 1224 Location Sittard-Geleen Job Type Graduates Vacancy Category Manufacturing & Engineering   Department: Improv... |
| Engineer Mechanical Instrumentaion Electrical Vacature: Engineer Mechanical, Instrumentaion, Electrical Engineer Mechanical, instrumentation, Electrical, (Manufacturing Talent Program) Reference Number 1224 Location Sittard-Geleen Job Type Graduates Vacancy Category Manufacturing ... |
| Maintenance Engineer Instrumentation Beschrijving: Department Site Geleen SABIC’s Geleen Site encompasses 7 chemical plants. The naphtha-crackers produce 1,250,000 ton/a of ethylene and 675,000 ton/a of propylene, mainly used as feedstock for our poly-olefins plants. Our naphtha-crackers have superior plant reliability and a competitive cost position. The maintenance and improvements efforts are crucial to ensure our future plant reliability as well a safe plant operation. From that perspective we are facing a challenge to prepare and implement numerous value-up and cost-down improvements in the next decade. Structure Site Geleen For both the Polymers as well the Chemicals & Intermediates Cluster, a split is made in responsibilities for Operations (short term focus), Site Improvements (long-term focus) and Site Services. The latter has the responsibility in planning, scheduling and execution of projects, maintenance and turn-arounds. Operations has a responsibility for safe and maximum production. The responsibilities of Site Improvements are twofold: Improving cost competitiveness of our plants: identifying, investigating the feasibility and scoping improvement proposals for maintenance, license-to-operate-project as well Value-up & Cost-down projects Custodians of process integrity & safety and regulatory compliancy Are you interested in contributing to our future challenge to ensure plan reliability and cost competitiveness? We’re looking for several professional engineers to strengthen the work force of the Site Improvement Department of Polymers. The Challenge As a Maintenance Engineer Instrumentation you act within three different aspects of maintenance engineering. You deliver risk-based scopes for Turn-Arounds, develop RCM-based maintenance strategies & plans mainly for preventive maintenance and participate in safety & improvement studies. Within the discipline Instrumentation you have the opportunity to apply your thorough knowledge of field instrumentation equipment : flow, temperature and pressure transmitters, control valves & switches, DCS systems, ATEX-, SIL and SIS regulations. You are able to perform FMEA and RCA’s in order to make informed decisions and opinions which will be documented with care. In addition, you can contribute to maintenance strategies based on RCM. You will also be actively involved in the analysis and evaluation of the effectiveness of preventive maintenance through cost-killers, cost drivers and breakdowns. The applications are unparalleled. You're directly involved in the preparation and implementation of major maintenance overhauls. Your Profile B.Sc. or M.Sc. Applied Physics, Process Control, Electro-Mechanical or equivalent; Several years of relevant experience in (petro-)chemical or energy industry; Familiar with SIL-/SIS regulations; Strong drive for continuous development of (inter-)personal competencies; Fluent in English and Dutch (or willingness to learn Dutch); Familiar with work processes like Plan-Do-Check-Act, Equipment Reliability, MRO and/or Turn-Arounds. Further Information For this position SABIC Europe is offering excellent primary and secondary working conditions. You have the opportunity to share your future in a growing international company in an ambitious, professional and dynamic environment. For further information, please contact: Mr. Roel van de Ven, Recruiter, tel. + 31 (0)6 1500 77 75. Sharing our futures in leadership SABIC is one of the world’s leading manufacturers of chemicals, fertilizers, plastics and metals. We supply these materials to other companies, who use them to make products on which the world has come to depend. We are the largest and most reliably profitable public company in the Middle East. Our success is the result of our focus on three key areas: investment in local partnerships, outstanding research and technology programs, and an ambitious global growth strategy. And last, but certainly not least, because of our talented employees who have a passion to deliver. In Europe, SABIC employs over 6,000 professionals and is running 6 world-scale production sites and 4 technology & innovation centers. We are present in almost every European country. Major locations within our broad network of innovation, production and marketing are: Teesside (UK), Cartagena (Spain), Gelsenkirchen (Germany), Geleen (Netherlands) Bergen op Zoom (The Netherlands) and Genk (Belgium). Based upon this strong fundament, we are a key producer of olefins, polyolefins, engineering thermoplastics resins, films and sheets in Europe. At SABIC we are pushing the limits further. We are ambitious and striving to become the preferred world leader in chemicals. To achieve this ambition, we strongly invest in our most important asset – our employees. We see it as our task to help you develop a career with us that challenges you in ways that really make you come alive. Make your career happen with SABIC. |
| Plant Equipment Engineer Electrical/ Instrument Plant Equipment Engineer (Electrical/Instrumentation)-DFI83482 Description  Is your gauge stretched to the max?  The Challenge The caprolactam plant needs to perform continuously on a constant high level to serve our customer needs,... |
| Manufacturing Execution Systems Engineer Beschrijving: Veel productiebedrijven worden tegenwoordig geconfronteerd met uitdagingen op het gebied van hun productieoperatie, kostenreductie en concurrentie van lage lonen landen. Daarnaast moeten zij, als gevolg van wet- en regelgeving, hun productie beter beheersen en dit te allen tijde kunnen verantwoorden. Hoe kunnen deze productiebedrijven hun bestaansrecht in Europa rechtvaardigen? Om deze uitdagingen samen met haar klanten aan te kunnen gaan heeft Logica zich gespecialiseerd in Manufacturing Executions Systems (MES). Specifieke IT systemen die zich kenmerken als spin in het web ten opzichte van vele andere applicaties, SAP-systemen en productiebesturing. Voor productiebedrijven is Logica een belangrijke System Integrator, die de markt adviseert op het gebied van MES. Zo geven we jaarlijks een MES survey uit, die wereldwijd een belangrijke rol speelt in de keuze van MES producten. Onze klanten opereren ook vaak wereldwijd. Dat levert hele interessante carrière-uitdagingen op voor jou! Zowel nationaal als internationaal. De Manufacturing IT practice van Logica bestaat uit een team van professionals, die zich richt op het bedenken, implementeren en beheren van slimme oplossingen. Door goed aan te sluiten bij de uitdagingen van onze klanten komen we tot verrassende oplossingen. Als MES engineer ben je geïnteresseerd in vragen en problemen van klanten op het gebied van productieverbetering en vertaalt deze naar oplossingen. Je bent in staat om met MES software te werken en specifieke wensen van klanten in maatwerk te bouwen of standaard oplossingen te configureren. Voor maatwerk zetten we vaak de nieuwste Microsoft tools in om snel tot resultaat te komen. Voor standaard MES software komen ondermeer SAP/ME, MII, Camstar en Aspentech in aanmerking. Je werkt graag in een team, maar kunt ook zelfstandig tot oplossingen komen. Als je voor bepaalde tijd in het buitenland wilt werken is dat een pré! We hebben een grote diversiteit aan klanten, hetgeen borg staat voor een afwisselende baan in onder meer de segmenten food/feed, high tech en de chemische industrie. Adviseren en implementeren van MES systemen en het daardoor verbeteren van de bedrijfsvoering van onze klanten is een van de speerpunten van Logica. |
| Manufacturing Execution Systems Engineer Beschrijving: Veel productiebedrijven worden tegenwoordig geconfronteerd met uitdagingen op het gebied van hun productieoperatie, kostenreductie en concurrentie van lage lonen landen. Daarnaast moeten zij, als gevolg van wet- en regelgeving, hun productie beter beheersen en dit te allen tijde kunnen verantwoorden. Hoe kunnen deze productiebedrijven hun bestaansrecht in Europa rechtvaardigen? Om deze uitdagingen samen met haar klanten aan te kunnen gaan heeft Logica zich gespecialiseerd in Manufacturing Executions Systems (MES). Specifieke IT systemen die zich kenmerken als spin in het web ten opzichte van vele andere applicaties, SAP-systemen en productiebesturing. Voor productiebedrijven is Logica een belangrijke System Integrator, die de markt adviseert op het gebied van MES. Zo geven we jaarlijks een MES survey uit, die wereldwijd een belangrijke rol speelt in de keuze van MES producten. Onze klanten opereren ook vaak wereldwijd. Dat levert hele interessante carrière-uitdagingen op voor jou! Zowel nationaal als internationaal. De Manufacturing IT practice van Logica bestaat uit een team van professionals, die zich richt op het bedenken, implementeren en beheren van slimme oplossingen. Door goed aan te sluiten bij de uitdagingen van onze klanten komen we tot verrassende oplossingen. Als MES engineer ben je geïnteresseerd in vragen en problemen van klanten op het gebied van productieverbetering en vertaalt deze naar oplossingen. Je bent in staat om met MES software te werken en specifieke wensen van klanten in maatwerk te bouwen of standaard oplossingen te configureren. Voor maatwerk zetten we vaak de nieuwste Microsoft tools in om snel tot resultaat te komen. Voor standaard MES software komen ondermeer SAP/ME, MII, Camstar en Aspentech in aanmerking. Je werkt graag in een team, maar kunt ook zelfstandig tot oplossingen komen. Als je voor bepaalde tijd in het buitenland wilt werken is dat een pré! We hebben een grote diversiteit aan klanten, hetgeen borg staat voor een afwisselende baan in onder meer de segmenten food/feed, high tech en de chemische industrie. Adviseren en implementeren van MES systemen en het daardoor verbeteren van de bedrijfsvoering van onze klanten is een van de speerpunten van Logica. |